These are water-based DTF inks for Epson based printers and printheads. Please take note: these are different than DTG inks and need to be printed on the DTF Film for transfers. See product description for more details.
Another tip: White ink needs to been gently rolled or shook daily to avoid pigment separation.
These are transfer sheets you print on using DTF inks. You can peel these while hot or cold (disclosed). These films have a glossy back. Typically, hot peel film sheets feed easier than our cold peel. Our inks work with both the Cold peel and Hot peel films that we sell.
Transfer adhesive powder is applied to DTF prints after printing. Medium adhesive is our favorite because its a nice balance between fine and coarse.
Instructions for Usage:
Apply to printed wet ink evenly and shake off excess from film. Heat at 210 degrees for 2-3 minutes until powder is melted.




